S-Plastics Ultem AUT195 resin is High flow Polyetherimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (S-Plastics test method).
TYPICAL PROPERTIES (1) | |||
MECHANICAL | Value | Unit | Standard |
Tensile Stress, yld, Type I, 5 mm/min | 96 | MPa | ASTM D 638 |
Tensile Strain, brk, Type I, 5 mm/min | 70 | % | ASTM D 638 |
Flexural Stress, yld, 2.6 mm/min, 100 mm span | 145 | MPa | ASTM D 790 |
Flexural Modulus, 2.6 mm/min, 100 mm span | 3170 | MPa | ASTM D 790 |
Tensile Modulus, 1 mm/min | 3000 | MPa | ISO 527 |
Flexural Modulus, 2 mm/min | 3100 | MPa | ISO 178 |
IMPACT | Value | Unit | Standard |
Izod Impact, unnotched, 23°C | 2082 | J/m | ASTM D 4812 |
Izod Impact, notched, 23°C | 53 | J/m | ASTM D 256 |
Izod Impact, Reverse Notched, 3.2 mm | 2136 | J/m | ASTM D 256 |
Izod Impact, notched 80*10*4 +23°C | 5 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 -30°C | 5 | kJ/m² | ISO 180/1A |
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 4 | kJ/m² | ISO 179/1eA |
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 4 | kJ/m² | ISO 179/1eA |
THERMAL | Value | Unit | Standard |
HDT, 1.82 MPa, 6.4 mm, unannealed | 190 | °C | ASTM D 648 |
Thermal Conductivity | 0.23 | W/m-°C | ISO 8302 |
CTE, 23°C to 150°C, flow | 6.E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 150°C, xflow | 6.E-05 | 1/°C | ISO 11359-2 |
Vicat Softening Temp, Rate B/120 | 205 | °C | ISO 306 |
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 195 | °C | ISO 75/Be |
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm | 180 | °C | ISO 75/Ae |
Metallized Haze Onset | 195 | °C | S-Plastics Method |
PHYSICAL | Value | Unit | Standard |
Specific Gravity | 1.26 | - | ASTM D 792 |
Mold Shrinkage, flow, 3.2 mm | 0.5 - 0.7 | % | S-Plastics Method |
Mold Shrinkage on Tensile Bar, xflow (2) | 0.5 - 0.7 | % | S-Plastics Method |
Melt Flow Rate, 337°C/6.6 kgf | 24 | g/10 min | ASTM D 1238 |
Density | 1.27 | g/cm³ | ISO 1183 |
Water Absorption, (23°C/sat) | 0.9 | % | ISO 62 |
Moisture Absorption (23°C / 50% RH) | 0.5 | % | ISO 62 |
Melt Volume Rate, MVR at 340°C/5.0 kg | 16 | cm³/10 min | ISO 1133 |
Source GMD, last updated:2009/03/13 |
Parameter | ||
Injection Molding | Value | Unit |
Drying Temperature | 135 | °C |
Drying Temperature | 130 - 140 | °C |
Drying Time | 4 - 6 | hrs |
Drying Time | 3 - 4 | hrs |
Drying Time (Cumulative) | 10 | hrs |
Maximum Moisture Content | 0.02 | % |
Melt Temperature | 350 - 370 | °C |
Melt Temperature | 340 - 380 | °C |
Nozzle Temperature | 350 - 370 | °C |
Nozzle Temperature | 340 - 360 | °C |
Front - Zone 3 Temperature | 350 - 370 | °C |
Front - Zone 3 Temperature | 340 - 360 | °C |
Middle - Zone 2 Temperature | 330 - 350 | °C |
Middle - Zone 2 Temperature | 345 - 365 | °C |
Rear - Zone 1 Temperature | 340 - 360 | °C |
Rear - Zone 1 Temperature | 320 - 340 | °C |
Hopper Temperature | 80 - 100 | °C |
Mold Temperature | 125 - 140 | °C |
Mold Temperature | 135 - 165 | °C |
Back Pressure | 0.3 - 0.7 | MPa |
Screw Speed | 40 - 70 | rpm |
Shot to Cylinder Size | 40 - 60 | % |
Vent Depth | 0.025 - 0.076 | mm |
Source GMD, last updated:2009/03/13 |
For more information please download the datasheet |
|
S-Plastics Ultem AUT195.pdf |
Get The Latest Quotation
First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
Click to consult and get the latest quotation within 24 hours! |