Send Message

PEI Sabic Ultem 2300 Resin Pellets 30% Glass Fiber KTW Certification

PEI Sabic Ultem 2300 Resin Pellets 30% Glass Fiber KTW Certification
Features Gallery Product Description Request A Quote
Glass Reinforced: 30%
Melt Flow Rate, 337°C/6.6 Kgf: 5
UL Recognized, 94V-0 Flame Class Rating (3): 0.25mm
UL Recognized, 94-5VA Rating (3): 1.21mm
High Light:

PEI sabic ultem 2300


sabic ultem 2300 Resin


30% Glass Fiber KTW Certification

Basic Infomation
Place of Origin: ——
Brand Name: Sabic Ultem
Certification: COA/ICP Test/Rohs/MSDS
Model Number: 2300
Payment & Shipping Terms
Packaging Details: 25KG/bag
Delivery Time: To be negotiated
Payment Terms: L/C, T/T, Western Union, MoneyGram
Supply Ability: To be negotiated
Product Description

Sabic Ultem polyetherimide (PEI) is an amorphous high-performance polymer with excellent heat resistance, good chemical corrosion resistance, inherent flame retardancy and excellent dimensional stability. The glass transition temperature (TG) is 217 ℃, the HDT is 190 ℃, and the relative thermal index (RTI) is 170 ℃. Low smoke emission, meeting the requirements of FDB, FAR and NBS. Low creep sensitivity, low and uniform coefficient of thermal expansion (CTE) (transverse and longitudinal). High strength and modulus at high temperature. It has good resistance to many chemical substances. It has stable dielectric constant and dissipation factor under a wide range of temperature and frequency conditions. It is transparent to visible light, infrared light and microwave radiation. Comply with FDA, European and American food contact regulations and USP class VI. Excellent processing performance on traditional molding equipment. ULTEM (PEI) materials are widely used in tableware / public catering, medical, aircraft, automobile, automotive lighting, telecommunications, electrical and fluid processing industries.


PEI characteristics:

  1. PEI is characterized by high strength, high rigidity, wear resistance and dimensional stability at high temperature.
  2. Pei is an amber transparent solid. It has inherent flame retardancy and low smoke without adding any additives. The oxygen index is 47%, and the combustion grade is ul94-v-0.
  3. The density of Pei is 1.28 ~ 1.42g/cm3, the glass transition temperature is 215 ℃, the thermal deformation temperature is 198 ~ 208 ℃, it can be used for a long time under 160 ~ 180 ℃, and the allowable intermittent high use temperature is 200 ℃.
  4. Pei has excellent mechanical strength, electrical insulation performance, radiation resistance, high and low temperature resistance, fatigue resistance and molding processability;

Adding glass fiber, carbon fiber or other fillers can achieve the purpose of strengthening and modification.

Sabic Ultem PEI 2300 is 30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification, KTW certification in recognized colors.



PEI Sabic Ultem 2300 Resin Pellets 30% Glass Fiber KTW Certification 0PEI Sabic Ultem 2300 Resin Pellets 30% Glass Fiber KTW Certification 1


MECHANICAL Value Unit Standard
Tensile Stress, yld, Type I, 5 mm/min 168 MPa ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min 158 MPa ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min 3 % ASTM D 638
Tensile Modulus, 5 mm/min 9300 MPa ASTM D 638
Flexural Stress, brk, 2.6 mm/min, 100 mm span 227 MPa ASTM D 790
Flexural Modulus, 2.6 mm/min, 100 mm span 8960 MPa ASTM D 790
Hardness, Rockwell M 114 - ASTM D 785
IMPACT Value Unit Standard
Izod Impact, unnotched, 23°C 427 J/m ASTM D 4812
Izod Impact, notched, 23°C 85 J/m ASTM D 256
Izod Impact, Reverse Notched, 3.2 mm 491 J/m ASTM D 256
THERMAL Value Unit Standard
Vicat Softening Temp, Rate B/50 227 °C ASTM D 1525
HDT, 0.45 MPa, 6.4 mm, unannealed 212 °C ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed 210 °C ASTM D 648
CTE, -20°C to 150°C, flow 1.98E-05 1/°C ASTM E 831
Relative Temp Index, Elec 180 °C UL 746B
Relative Temp Index, Mech w/impact 170 °C UL 746B
Relative Temp Index, Mech w/o impact 180 °C UL 746B
PHYSICAL Value Unit Standard
Specific Gravity 1.51 - ASTM D 792
Water Absorption, 24 hours 0.16 % ASTM D 570
Water Absorption, equilibrium, 23C 0.9 % ASTM D 570
Mold Shrinkage, flow, 3.2 mm 0.2 - 0.4 % SABIC Method
Mold Shrinkage, xflow, 3.2 mm 0.2 - 0.4 % SABIC Method
Melt Flow Rate, 337°C/6.6 kgf 5 g/10 min ASTM D 1238
ELECTRICAL Value Unit Standard
Volume Resistivity 3.E+16 Ohm-cm ASTM D 257
Dielectric Strength, in air, 1.6 mm 24.8 kV/mm ASTM D 149
Dielectric Strength, in oil, 1.6 mm 30.3 kV/mm ASTM D 149
Relative Permittivity, 1 kHz 3.7 - ASTM D 150
Dissipation Factor, 1 kHz 0.0015 - ASTM D 150
Dissipation Factor, 2450 MHz 0.0053 - ASTM D 150
Arc Resistance, Tungsten {PLC} 6 PLC Code ASTM D 495
Hot Wire Ignition {PLC) 1 PLC Code UL 746A
High Voltage Arc Track Rate {PLC} 3 PLC Code UL 746A
High Ampere Arc Ign, surface {PLC} 4 PLC Code UL 746A
Comparative Tracking Index (UL) {PLC} 4 PLC Code UL 746A
UL Recognized, 94V-0 Flame Class Rating (3) 0.25 mm UL 94
UL Recognized, 94-5VA Rating (3) 1.21 mm UL 94
CSA (See File for complete listing) LS88480 File No. CSA LISTED
Oxygen Index (LOI) 50 % ASTM D 2863
NBS Smoke Density, Flaming, Ds 4 min 1.6 - ASTM E 662
Source GMD, last updated:12/29/1999    



Injection Molding Value Unit
Drying Temperature 150 °C
Drying Time 4 - 6 hrs
Drying Time (Cumulative) 24 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 350 - 400 °C
Nozzle Temperature 345 - 400 °C
Front - Zone 3 Temperature 345 - 400 °C
Middle - Zone 2 Temperature 340 - 400 °C
Rear - Zone 1 Temperature 330 - 400 °C
Mold Temperature 135 - 165 °C
Back Pressure 0.3 - 0.7 MPa
Screw Speed 40 - 70 rpm
Shot to Cylinder Size 40 - 60 %
Vent Depth 0.025 - 0.076 mm
Source GMD, last updated:12/29/1999  


Available in stock with favorable price

1.1000 series

1000,MI9.0; 1010,MI18.0; Hu1000, medical grade.


2.2000 series, add GF

2100, add 10%GF, MI 7.0;

2110, add 10%GF, MI 11.0;

2200, add 20%GF, MI 6.0;

2210, add 20%GF, MI 8.4;

2300, add 30%GF, MI 5.0;

2310, add 30%GF, MI 7.6;


3. Others

MD130, MD131, AUT195, ATX200, etc;

Our customers

In recent years, we have deeply cultivated the domestic market and actively explored foreign markets.Up to now, we have provided high-quality products and services to more than 1,000 customers in various industries, including: electronics and electrical appliances, medical, food, automotive electronics, optoelectronic communications, photovoltaic new energy, water treatment, transportation and other industries.

PEI Sabic Ultem 2300 Resin Pellets 30% Glass Fiber KTW Certification 2


Samtion chemical supplies engineering plastics and special modified materials of SABIC and other brands.Our authentic products are guaranteed, with complete qualifications and superior supply capacity and price advantages.

Every batch of our products is subject to strict quality inspection to ensure the original supply. All products have MSDS, ROHS, SGS, REACH, FDA, EU, UL, COC / COA certificates!!

PEI Sabic Ultem 2300 Resin Pellets 30% Glass Fiber KTW Certification 3

Our warehouse

With a strong sales network and strength, we have warehousing services in Guangzhou, Dongguan, Shenzhen free trade zone, Hong Kong and other four places (conventional product inventory exceeds 1000 tons). We can provide customers with rapid response, professional service and excellent products!

PEI Sabic Ultem 2300 Resin Pellets 30% Glass Fiber KTW Certification 4


For more information please download the datasheet

PEI Sabic Ultem 2300 Resin Pellets 30% Glass Fiber KTW Certification 5  Sabic Ultem 2300.pdf


Get The Latest Quotation


First-level distribution source in South China

Reduce procurement costs, improve supply stability,

Help you find the most suitable engineering plastic materials


PEI Sabic Ultem 2300 Resin Pellets 30% Glass Fiber KTW Certification 6Click to consult and get the latest quotation within 24 hours!


Free Talk 24hours

Recommended Products
Get in touch with us
Tel : 86-13925273675
Characters Remaining(20/3000)