Sabic NoryL NH7010 resin is
Property
| TYPICAL PROPERTIES (1) | |||
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, yld, Type I, 50 mm/min | 68 | MPa | ASTM D 638 |
| Tensile Stress, brk, Type I, 50 mm/min | 49 | MPa | ASTM D 638 |
| Tensile Strain, yld, Type I, 50 mm/min | 5.2 | % | ASTM D 638 |
| Tensile Strain, brk, Type I, 50 mm/min | 41 | % | ASTM D 638 |
| Tensile Modulus, 5 mm/min | 2250 | MPa | ASTM D 638 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 102 | MPa | ASTM D 790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 2470 | MPa | ASTM D 790 |
| Tensile Stress, yield, 50 mm/min | 69 | MPa | ISO 527 |
| Tensile Stress, break, 50 mm/min | 63 | MPa | ISO 527 |
| Tensile Strain, yield, 50 mm/min | 4.9 | % | ISO 527 |
| Tensile Strain, break, 50 mm/min | 8.4 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 2500 | MPa | ISO 527 |
| Flexural Stress, yield, 2 mm/min | 109 | MPa | ISO 178 |
| Flexural Modulus, 2 mm/min | 2520 | MPa | ISO 178 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, notched, 23°C | 223 | J/m | ASTM D 256 |
| Izod Impact, notched, -30°C | 89 | J/m | ASTM D 256 |
| Instrumented Impact Total Energy, 23°C | 38 | J | ASTM D 3763 |
| Izod Impact, notched 80*10*4 +23°C | 20 | kJ/m² | ISO 180/1A |
| Izod Impact, notched 80*10*4 -30°C | 8 | kJ/m² | ISO 180/1A |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 21 | kJ/m² | ISO 179/1eA |
| THERMAL | Value | Unit | Standard |
| Vicat Softening Temp, Rate B/50 | 160 | °C | ASTM D 1525 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 139 | °C | ASTM D 648 |
| CTE, -40°C to 40°C, flow | 8.16E-05 | 1/°C | ASTM E 831 |
| CTE, -40°C to 40°C, xflow | 8.15E-05 | 1/°C | ASTM E 831 |
| CTE, -40°C to 40°C, flow | 8.16E-05 | 1/°C | ISO 11359-2 |
| CTE, -40°C to 40°C, xflow | 8.15E-05 | 1/°C | ISO 11359-2 |
| Vicat Softening Temp, Rate B/50 | 161 | °C | ISO 306 |
| Vicat Softening Temp, Rate B/120 | 162 | °C | ISO 306 |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 139 | °C | ISO 75/Af |
| Relative Temp Index, Elec | 105 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 105 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 105 | °C | UL 746B |
| PHYSICAL | Value | Unit | Standard |
| Specific Gravity | 1.09 | - | ASTM D 792 |
| Mold Shrinkage, flow, 3.2 mm | 0.5 - 0.8 | % | SABIC Method |
| Melt Flow Rate, 300°C/5.0 kgf | 10.1 | g/10 min | ASTM D 1238 |
| Density | 1.09 | g/cm³ | ISO 1183 |
| Water Absorption, (23°C/sat) | 0.25 | % | ISO 62 |
| Moisture Absorption (23°C / 50% RH) | 0.05 | % | ISO 62 |
| Melt Volume Rate, MVR at 300°C/5.0 kg | 10 | cm³/10 min | ISO 1133 |
| ELECTRICAL | Value | Unit | Standard |
| Arc Resistance, Tungsten {PLC} | 6 | PLC Code | ASTM D 495 |
| Hot Wire Ignition {PLC) | 0 | PLC Code | UL 746A |
| High Voltage Arc Track Rate {PLC} | 4 | PLC Code | UL 746A |
| Comparative Tracking Index (UL) {PLC} | 3 | PLC Code | UL 746A |
| FLAME CHARACTERISTICS | Value | Unit | Standard |
| UL Compliant, 94V-0 Flame Class Rating (3)(4) | 1.5 | mm | UL 94 by GE |
| UL Compliant, 94-5VA Rating (3)(4) | 2 | mm | UL 94 by GE |
| Source GMD, last updated:10/03/2007 | |||
| Parameter | |||
| Injection Molding | Value | Unit | |
| Drying Temperature | 110 - 120 | °C | |
| Drying Time | 3 - 4 | hrs | |
| Drying Time (Cumulative) | 8 | hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 300 - 325 | °C | |
| Nozzle Temperature | 300 - 325 | °C | |
| Front - Zone 3 Temperature | 290 - 325 | °C | |
| Middle - Zone 2 Temperature | 275 - 320 | °C | |
| Rear - Zone 1 Temperature | 265 - 315 | °C | |
| Mold Temperature | 80 - 110 | °C | |
| Back Pressure | 0.3 - 0.7 | MPa | |
| Screw Speed | 20 - 100 | rpm | |
| Shot to Cylinder Size | 30 - 70 | % | |
| Source GMD, last updated:10/03/2007 | |||
|
For more information please see below |
|
 |
Sabic Noryl Resin NH7010.pdf |
|
Get The Latest Quotation 5000 kinds of products 1000 tons of spot inventory First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
|
Sabic Noryl Resin Application
|
Sabic Noryl PPO is modified polyphenylene oxide (PPO) resins produced by the Sabic company. It is known for its excellent balance of properties, including high heat resistance, dimensional stability, and chemical resistance.
Noryl PPO resins are produced by blending PPO with other materials, such as polystyrene or polyamide.Sabic Noryl PPO include: |
|
|
| 3. Chemical resistance: Sabic Noryl PPO has good chemical resistance. It is commonly used in automotive and electrical applications where chemical resistance is important. 4. Good electrical properties: Sabic Noryl PPO has good electrical properties. This makes it suitable for use in electrical and electronic applications, such as connectors and switches. 5. Ease of processing: Sabic Noryl PPO is easy to process and can be easily molded into complex shapes with thin walls. |
||
Related products
Different Noryl Resin have different applications
We recommend more different kinds of PPO categories for your reference:
Company Profile
The Shenzhen Samtion Chemical Co., Ltd
Focus on the export and production support of engineering plastics and special modified materials
15 Years Experience
We are a leading supplier of top end engineering plastics raw materials.
The company is formed by a group of senior teams engaged in the sales and production of engineering plastic materials for over 15 years.
More Than 1,000 Customers
Up to now, we have provided
high-quality products and services to more than 1,000 customers in various industries, including: electronics and electrical appliances, medical, food, automotive electronics, optoelectronic communications, photovoltaic new energy, water treatment,transportation and other industries.
Quality Assurance
Every batch of our products is subject to strict quality inspection to ensure the original supply. All products have MSDS, ROHS, SGS, REACH,EU, UL, COC / COA certificates!
FAQ
1. About quality assurance
We provide all product test authoritative reports required by customers, and all products have original factory shipment certificates and qualifications. We will take full responsibility for any customer complaints caused by our product quality problems.
2. About the shipping method
We can use land transportation, sea transportation, and air transportation according to customer requirements; we can also choose logistics suppliers according to customer requirements.
3. About the payment method
T/T, Western Union, PayPal, LC, etc. are all acceptable.
4. About MOQ:
The minimum quantity of an order is dependent on different types of materials, please ask our sales representatives
5. About quotation:
You can contact oursales representatives for a quotation at any time, we promise to reply within 7-24 hours
6. About technical support
We have a large technical support team, which can provide technical support including material selection, color matching service,mold consultation, product production service, etc. according to the situation of the customer's project.
