S-Plastics Geloy GY1226 resin is ASA/PVC pellets for capstock profile extrusion. Suitable for outdoor unpainted applications. Available in dark colors only.
| TYPICAL PROPERTIES (1) | |||
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, yld, Type I, 50 mm/min | 45 | MPa | ASTM D 638 |
| Tensile Strain, brk, Type I, 50 mm/min | 70 | % | ASTM D 638 |
| Tensile Modulus, 50 mm/min | 2890 | MPa | ASTM D 638 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 64 | MPa | ASTM D 790 |
| Flexural Stress, yld, 2.6 mm/min, 100 mm span | 63 | MPa | ASTM D 790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 2270 | MPa | ASTM D 790 |
| Hardness, Rockwell R | 100 | - | ASTM D 785 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, notched, 23°C | 1068 | J/m | ASTM D 256 |
| Izod Impact, notched, -30°C | 106 | J/m | ASTM D 256 |
| Gardner, 23°C | 24 | J | ASTM D 3029 |
| Gardner Impact (Procedure B) | 8006 | J/m | ASTM D 4226 |
| Gardner, -30°C | 10 | J | ASTM D 3029 |
| Instrumented Impact Total Energy, 23°C | 55 | J | ASTM D 3763 |
| Instrumented Impact Total Energy, -30°C | 54 | J | ASTM D 3763 |
| THERMAL | Value | Unit | Standard |
| HDT, 1.82 MPa, annealed | 84 | °C | ASTM D 648 |
| HDT, 0.45 MPa, 6.4 mm, unannealed | 85 | °C | ASTM D 648 |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 71 | °C | ASTM D 648 |
| CTE, -40°C to 40°C, flow | 8.46E-05 | 1/°C | ASTM E 831 |
| PHYSICAL | Value | Unit | Standard |
| Specific Gravity | 1.21 | - | ASTM D 792 |
| Water Absorption, 24 hours | 0.11 | % | ASTM D 570 |
| Melt Flow Rate, 200°C/3.8 kgf | 7 | g/10 min | ASTM D 1238 |
| OPTICAL | Value | Unit | Standard |
| Gloss, untextured, 60 degrees | 70 | - | ASTM D 523 |
| ELECTRICAL | Value | Unit | Standard |
| Volume Resistivity | 1.8E+16 | Ohm-cm | ASTM D 257 |
| Surface Resistivity | 1.8E+15 | Ohm | ASTM D 257 |
| Dielectric Strength, in air, 3.2 mm | 18.7 | kV/mm | ASTM D 149 |
| Relative Permittivity, 100 Hz | 3.5 | - | ASTM D 150 |
| Dissipation Factor, 100 Hz | 0.0021 | - | ASTM D 150 |
| Source GMD, last updated:10/04/1999 | |||
| Parameter | ||
| Extrusion | Value | Unit |
| Drying Temperature | 80 - 90 | °C |
| Drying Time | 3 - 4 | hrs |
| Minimum Moisture Content | 0.04 | % |
| Melt Temperature | 180 - 200 | °C |
| Barrel - Zone 1 Temperature | 170 - 180 | °C |
| Barrel - Zone 2 Temperature | 175 - 190 | °C |
| Barrel - Zone 3 Temperature | 180 - 195 | °C |
| Die Temperature | 175 - 180 | °C |
| Roll Stack Temperature - Top | 175 - 180 | °C |
| Roll Stack Temperature - Middle | 175 - 180 | °C |
| Roll Stack Temperature - Bottom | 180 - 190 | °C |
| Source GMD, last updated:10/04/1999 | ||
Other related products we recommend:
|
For more information please download the datesheet |
|
 |
S-Plastics Geloy GY1226.pdf |
|
Get The Latest Quotation
First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
