S-Plastics Stat-kon Noryl_NC3508 resin is PRELIMINARY DATA. 33% glass/mineral/carbon filled PPE+PS. ESD, high heat, tight tolerance: electronic packaging/chip trays.
| TYPICAL PROPERTIES (1) | |||
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, yld, Type I, 5 mm/min | 117 | MPa | ASTM D 638 |
| Tensile Stress, brk, Type I, 5 mm/min | 119 | MPa | ASTM D 638 |
| Tensile Strain, yld, Type I, 5 mm/min | 1.5 | % | ASTM D 638 |
| Tensile Strain, brk, Type I, 5 mm/min | 4.5 | % | ASTM D 638 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 9740 | MPa | ASTM D 790 |
| Flexural Modulus, 2.6 mm/min, 100 mm span | 9650 | MPa | ASTM D 790 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, unnotched, 23°C | 224 | J/m | ASTM D 4812 |
| Izod Impact, notched, 23°C | 42 | J/m | ASTM D 256 |
| Instrumented Impact Total Energy, 23°C | 8 | J | ASTM D 3763 |
| THERMAL | Value | Unit | Standard |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 179 | °C | ASTM D 648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 177 | °C | ASTM D 648 |
| PHYSICAL | Value | Unit | Standard |
| Specific Gravity | 1.31 | - | ASTM D 792 |
| Mold Shrinkage, flow, 3.2 mm | 0.08 - 0.18 | % | S-Plastics Method |
| Mold Shrinkage, xflow, 3.2 mm | 0.09 - 0.19 | % | S-Plastics Method |
| ELECTRICAL | Value | Unit | Standard |
| Volume Resistivity | 5.E+04 | Ohm-cm | ASTM D 257 |
| Surface Resistivity | 1.E+05 | Ohm | ASTM D 257 |
| Static Decay, 5000V to <50V | 0.01 | < seconds | FTMS101B |
| Source GMD, last updated:06/20/2000 | |||
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 110 - 120 | °C |
| Drying Time | 2 - 4 | hrs |
| Drying Time (Cumulative) | 8 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 305 - 335 | °C |
| Nozzle Temperature | 305 - 335 | °C |
| Front - Zone 3 Temperature | 300 - 335 | °C |
| Middle - Zone 2 Temperature | 300 - 325 | °C |
| Rear - Zone 1 Temperature | 295 - 320 | °C |
| Mold Temperature | 95 - 130 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 50 - 100 | rpm |
| Shot to Cylinder Size | 30 - 70 | % |
| Vent Depth | 0.038 - 0.051 | mm |
| Source GMD, last updated:06/20/2000 | ||
Other related products we recommend:
|
For more information please download the datesheet |
|
 |
S-Plastics Stat-kon Noryl_NC3508.pdf |
|
Get The Latest Quotation
First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
