S-Plastics PC 3414R Description
40% GR, provides improved mechanical properties and UL94V-1 rated at 0.058". Internal mold release added.
| TYPICAL PROPERTIES (1) | |||
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, brk, Type I, 5 mm/min | 158 | MPa | ASTM D 638 |
| Tensile Strain, brk, Type I, 5 mm/min | 3 | % | ASTM D 638 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 186 | MPa | ASTM D 790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 9650 | MPa | ASTM D 790 |
| Hardness, Rockwell M | 93 | - | ASTM D 785 |
| Hardness, Rockwell R | 119 | - | ASTM D 785 |
| Taber Abrasion, CS-17, 1 kg | 32 | mg/1000cy | ASTM D 1044 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, unnotched, 23°C | 1281 | J/m | ASTM D 4812 |
| Izod Impact, notched, 23°C | 133 | J/m | ASTM D 256 |
| Tensile Impact, Type "S" | 67 | kJ/m² | ASTM D 1822 |
| Falling Dart Impact (D 3029), 23°C | 6 | J | ASTM D 3029 |
| THERMAL | Value | Unit | Standard |
| Vicat Softening Temp, Rate B/50 | 165 | °C | ASTM D 1525 |
| HDT, 0.45 MPa, 6.4 mm, unannealed | 154 | °C | ASTM D 648 |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 146 | °C | ASTM D 648 |
| CTE, -40°C to 95°C, flow | 1.62E-05 | 1/°C | ASTM E 831 |
| PHYSICAL | Value | Unit | Standard |
| Specific Gravity | 1.52 | - | ASTM D 792 |
| Specific Volume | 0.65 | cm³/g | ASTM D 792 |
| Density | 1.522 | g/cm³ | ASTM D 792 |
| Water Absorption, 24 hours | 0.12 | % | ASTM D 570 |
| Water Absorption, equilibrium, 23C | 0.23 | % | ASTM D 570 |
| Mold Shrinkage, flow, 3.2 mm | 0.1 - 0.2 | % | S-Plastics Method |
| Melt Flow Rate, 300°C/5.0 kgf | 12.6 | g/10 min | ASTM D 1238 |
| ELECTRICAL | Value | Unit | Standard |
| Volume Resistivity | >1.E+17 | Ohm-cm | ASTM D 257 |
| Dielectric Strength, in air, 3.2 mm | 17.7 | kV/mm | ASTM D 149 |
| Relative Permittivity, 50/60 Hz | 3.53 | - | ASTM D 150 |
| Relative Permittivity, 1 MHz | 3.48 | - | ASTM D 150 |
| FLAME CHARACTERISTICS | Value | Unit | Standard |
| UL Recognized, 94V-1 Flame Class Rating (3) | 1.11 | mm | UL 94 |
| UL Recognized, 94V-0 Flame Class Rating (3) | 2.99 | mm | UL 94 |
| CSA (See File for complete listing) | LS88480 | File No. | CSA LISTED |
| Source GMD, last updated:12/29/1999 | |||
|
For more information please see below |
|
|
S-Plastics polycarbonate 3414R.pdf |
|
Get The Latest Quotation 5000 kinds of products 1000 tons of spot inventory First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
|
S-Plastics PC Application
|
S-Plastics PC's versatility and strength make it a go-to material for a wide range of applications across various industries
|
|
Related products
Different PC have different applications
We recommend more different kinds of PC categories for your reference
Click the link below to reach the detailed product page
Company Profile
The Shenzhen Samtion Chemical Co., Ltd
Focus on the export and production support of engineering plastics and special modified materials
15 Years Experience
We are a leading supplier of top end engineering plastics raw materials.
The company is formed by a group of senior teams engaged in the sales and production of engineering plastic materials for over 15 years.
More Than 1,000 Customers
Up to now, we have provided
high-quality products and services to more than 1,000 customers in various industries, including: electronics and electrical appliances, medical, food, automotive electronics, optoelectronic communications, photovoltaic new energy, water treatment,transportation and other industries.
Quality Assurance
Every batch of our products is subject to strict quality inspection to ensure the original supply. All products have MSDS, ROHS, SGS, REACH,EU, UL, COC / COA certificates!
FAQ
1.About quality assurance
We provide all product test authoritative reports required by customers, and all products have original factory shipment certificates and qualifications. We will take full responsibility for any customer complaints caused by our product quality problems.
2.Do you offer technical support?
Yes, we have a team of technical experts who can provide support and guidance on the selection and use of our materials.
3.What certifications do your have?
Our plastic raw materials are certified to meet various industry standards, including ISO, ASTM, SGS,FDAand UL. We can provide documentation of these certifications upon request.
4. About MOQ
The minimum quantity of an order is dependent on different types of materials, please ask our sales representatives
5. About quotation
You can contact oursales representatives for a quotation at any time, we promise to reply within 7-24 hours
