Send Message

Sabic Lexan 103 Nonhalogenated. 7.0 MFR, For Thicker Sections Without Sinks. UV Stabilized For Outdoor And Lighting.

100KG
MOQ
*USD
Price
Sabic Lexan 103 Nonhalogenated. 7.0 MFR, For Thicker Sections Without Sinks. UV Stabilized For Outdoor And Lighting.
Features Gallery Product Description Request A Quote
Features
Specifications
Melt Flow Rate, 300°C/1.2 Kgf: 7
UL Recognized, 94HB Flame Class Rating (3): 0.73
Basic Infomation
Place of Origin: ——
Brand Name: Sabic Lexan
Certification: COA/ICP Test/Rohs/MSDS
Model Number: 103
Payment & Shipping Terms
Packaging Details: 25KG/BAG
Delivery Time: To be negotiated
Payment Terms: L/C, T/T, Western Union, MoneyGram
Supply Ability: To be negotiated
Product Description

Sabic Lexan  103 resin isUL rated HB as of 10/97. 200 series recommended when V-2 rating required. Nonhalogenated. 7.0 MFR, for thicker sections without sinks. UV stabilized for outdoor and lighting.
 


Property

TYPICAL PROPERTIES (1)   
MECHANICALValueUnitStandard
Tensile Stress, yld, Type I, 50 mm/min62MPaASTM D 638
Tensile Stress, brk, Type I, 50 mm/min65MPaASTM D 638
Tensile Strain, yld, Type I, 50 mm/min7%ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min110%ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span93MPaASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span2340MPaASTM D 790
Hardness, Rockwell M70-ASTM D 785
Hardness, Rockwell R118-ASTM D 785
Taber Abrasion, CS-17, 1 kg10mg/1000cyASTM D 1044
IMPACTValueUnitStandard
Izod Impact, unnotched, 23°C3204J/mASTM D 4812
Izod Impact, notched, 23°C907J/mASTM D 256
Tensile Impact, Type "S"546kJ/m²ASTM D 1822
Falling Dart Impact (D 3029), 23°C169JASTM D 3029
THERMALValueUnitStandard
Vicat Softening Temp, Rate B/50154°CASTM D 1525
HDT, 0.45 MPa, 6.4 mm, unannealed137°CASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed132°CASTM D 648
CTE, -40°C to 95°C, flow6.84E-051/°CASTM E 831
Specific Heat1.25J/g-°CASTM C 351
Thermal Conductivity0.19W/m-°CASTM C 177
Relative Temp Index, Elec130°CUL 746B
Relative Temp Index, Mech w/impact130°CUL 746B
Relative Temp Index, Mech w/o impact130°CUL 746B
PHYSICALValueUnitStandard
Specific Gravity1.2-ASTM D 792
Specific Volume0.83cm³/gASTM D 792
Density1.19g/cm³ASTM D 792
Water Absorption, 24 hours0.15%ASTM D 570
Water Absorption, equilibrium, 23C0.35%ASTM D 570
Water Absorption, equilibrium, 100°C0.58%ASTM D 570
Mold Shrinkage, flow, 3.2 mm0.5 - 0.7%SABIC Method
Melt Flow Rate, 300°C/1.2 kgf7g/10 minASTM D 1238
OPTICALValueUnitStandard
Light Transmission88%ASTM D 1003
Haze1%ASTM D 1003
Refractive Index1.586-ASTM D 542
ELECTRICALValueUnitStandard
Volume Resistivity>1.E+17Ohm-cmASTM D 257
Dielectric Strength, in air, 3.2 mm14.9kV/mmASTM D 149
Relative Permittivity, 50/60 Hz3.17-ASTM D 150
Relative Permittivity, 1 MHz2.96-ASTM D 150
Dissipation Factor, 50/60 Hz0.0009-ASTM D 150
Dissipation Factor, 1 MHz0.01-ASTM D 150
Hot Wire Ignition {PLC)4PLC CodeUL 746A
High Voltage Arc Track Rate {PLC}2PLC CodeUL 746A
High Ampere Arc Ign, surface {PLC}1PLC CodeUL 746A
Comparative Tracking Index (UL) {PLC}2PLC CodeUL 746A
FLAME CHARACTERISTICSValueUnitStandard
UL Recognized, 94HB Flame Class Rating (3)0.73mmUL 94
UV-light, water exposure/immersionF1-UL 746C
Source GMD, last updated:01/04/2000  

Processing

Parameter  
Injection MoldingValueUnit
Drying Temperature120°C
Drying Time3 - 4hrs
Drying Time (Cumulative)48hrs
Maximum Moisture Content0.02%
Melt Temperature310 - 330°C
Nozzle Temperature305 - 325°C
Front - Zone 3 Temperature310 - 330°C
Middle - Zone 2 Temperature300 - 320°C
Rear - Zone 1 Temperature290 - 310°C
Mold Temperature80 - 115°C
Back Pressure0.3 - 0.7MPa
Screw Speed40 - 70rpm
Shot to Cylinder Size40 - 60%
Vent Depth0.025 - 0.076mm
Source GMD, last updated:01/04/2000 

 
 


 

Recommended Products
Get in touch with us
Tel : 86-13925273675
Characters Remaining(20/3000)