Sabic NORYL N300X resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains nonbrominated,non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V0 at 1.5mm.
NORYL N300X resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytical stability. This material is an excellent candidate for indoor and outdoor electrical enclosure and solar / photovoltaic junction box applications
Noryl* Resin N300X
| Property | |||
| TYPICAL PROPERTIES (1) | |||
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, yld, Type I, 50 mm/min | 74 | MPa | ASTM D 638 |
| Tensile Stress, brk, Type I, 50 mm/min | 73 | MPa | ASTM D 638 |
| Tensile Strain, yld, Type I, 50 mm/min | 5.3 | % | ASTM D 638 |
| Tensile Strain, brk, Type I, 50 mm/min | 7.6 | % | ASTM D 638 |
| Tensile Modulus, 5 mm/min | 2380 | MPa | ASTM D 638 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 110 | MPa | ASTM D 790 |
| Flexural Stress, yld, 2.6 mm/min, 100 mm span | 110 | MPa | ASTM D 790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 2650 | MPa | ASTM D 790 |
| Flexural Modulus, 2.6 mm/min, 100 mm span | 2500 | MPa | ASTM D 790 |
| Hardness, Rockwell R | 119 | - | ASTM D 785 |
| Tensile Stress, yield | 75 | MPa | ISO 527 |
| Tensile Stress, break | 66 | MPa | ISO 527 |
| Tensile Strain, yield | 5.2 | % | ISO 527 |
| Tensile Strain, break | 13 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 2220 | MPa | ISO 527 |
| Flexural Stress | 112 | MPa | ISO 178 |
| Flexural Modulus | 2520 | MPa | ISO 178 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, notched, 23°C | 190 | J/m | ASTM D 256 |
| Izod Impact, notched, -30°C | 55 | J/m | ASTM D 256 |
| Instrumented Impact Total Energy, 23°C | 54 | J | ASTM D 3763 |
| Izod Impact, notched 80*10*4 +23°C | 15 | kJ/m² | ISO 180/1A |
| THERMAL | Value | Unit | Standard |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 155 | °C | ASTM D 648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 140 | °C | ASTM D 648 |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 145 | °C | ASTM D 648 |
| CTE, -40°C to 40°C, flow | 8.E-05 | 1/°C | ASTM E 831 |
| CTE, -40°C to 40°C, xflow | 8.E-05 | 1/°C | ASTM E 831 |
| Vicat Softening Temp, Rate B/50 | 162 | °C | ISO 306 |
| Vicat Softening Temp, Rate B/120 | 164 | °C | ISO 306 |
| HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 156 | °C | ISO 75/Be |
| HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm | 140 | °C | ISO 75/Ae |
| Relative Temp Index, Elec | 105 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 105 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 105 | °C | UL 746B |
| PHYSICAL | Value | Unit | Standard |
| Specific Gravity | 1.1 | - | ASTM D 792 |
| Water Absorption, equilibrium, 23C | 0.06 | % | ASTM D 570 |
| Mold Shrinkage, flow, 3.2 mm | 0.5 - 0.7 | % | SABIC Method |
| Mold Shrinkage on Tensile Bar, xflow (2) | 0.5 - 0.7 | % | SABIC Method |
| Melt Flow Rate, 280°C/5.0 kgf | 7.4 | g/10 min | ASTM D 1238 |
| Melt Volume Rate, MVR at 280°C/5.0 kg | 7 | cm³/10 min | ISO 1133 |
| ELECTRICAL | Value | Unit | Standard |
| Volume Resistivity | 1.E+17 | Ohm-cm | ASTM D 257 |
| Surface Resistivity | 1.E+17 | Ohm | ASTM D 257 |
| Dielectric Strength, in oil, 3.2 mm | 19.4 | kV/mm | ASTM D 149 |
| Relative Permittivity, 50/60 Hz | 2.68 | - | ASTM D 150 |
| Relative Permittivity, 1 MHz | 2.63 | - | ASTM D 150 |
| Dissipation Factor, 50/60 Hz | 0.0031 | - | ASTM D 150 |
| Dissipation Factor, 1 MHz | 0.009 | - | ASTM D 150 |
| Arc Resistance, Tungsten {PLC} | 6 | PLC Code | ASTM D 495 |
| Hot Wire Ignition {PLC) | 0 | PLC Code | UL 746A |
| High Voltage Arc Track Rate {PLC} | 4 | PLC Code | UL 746A |
| High Ampere Arc Ign, surface {PLC} | 4 | PLC Code | UL 746A |
| Comparative Tracking Index (UL) {PLC} | 3 | PLC Code | UL 746A |
| FLAME CHARACTERISTICS | Value | Unit | Standard |
| UL Recognized, 94V-0 Flame Class Rating (3) | 1.47 | mm | UL 94 |
| Source GMD, last updated:02/01/2005 | |||
Noryl* Resin N300X
| Processing | ||
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 110 - 120 | °C |
| Drying Time | 3 - 4 | hrs |
| Drying Time (Cumulative) | 8 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 300 - 325 | °C |
| Nozzle Temperature | 300 - 325 | °C |
| Front - Zone 3 Temperature | 290 - 325 | °C |
| Middle - Zone 2 Temperature | 275 - 320 | °C |
| Rear - Zone 1 Temperature | 265 - 315 | °C |
| Mold Temperature | 80 - 110 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 20 - 100 | rpm |
| Shot to Cylinder Size | 30 - 70 | % |
Polyphenylene oxide (PPO) is one of the world's general engineering plastics. With high heat resistance, good electrical properties, excellent hydrolytic stability and the ability to use non-halogen FR packages.
Sabic Noryl PPO is an amorphous engineering plastics which made by modifying PPO with polystyrene etc. It has the advantages of high rigidity, high heat resistance, flame resistance and excellent electrical properties. In addition, PPO also has the advantages of non-toxicity and pollution resistance. The biggest feature is that it has excellent dimensional stability and outstanding electrical insulation under long-term load, and has a wide temperature range(It can be used for a long time in the range of -127~121℃.). The dielectric constant and dielectric loss of PPO is one of the smallest varieties of engineering plastics, and it is hardly affected by temperature and humidity. It can be used in the field of low, medium and high frequency electric fields. It has excellent water resistance and steam resistance, and the products have higher tensile strength and impact strength, and good creep resistance.
The advantages of the product are summarized as follows
Sabic Noryl PPO can be used in a wide range of fields such as :
Drinking water / food grade:731,731S,GFN10F,GFN20F,GFN30F,GFN1520V,GFN1630V(Color requirements)
Unreinforce and flame retardant: 0150B,N190X,PX9406P,SE100X
Reinforce and flame retardant: SE1GFN1,SE1GFN2,SE1GFN3,HS2000X
|
For more information please see below |
|
 |
Sabic PPO N300X.pdf |
|
Get The Latest Quotation 5000 kinds of products 1000 tons of spot inventory First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
|
Sabic Noryl Resin Application
|
Sabic Noryl PPO is modified polyphenylene oxide (PPO) resins produced by the Sabic company. It is known for its excellent balance of properties, including high heat resistance, dimensional stability, and chemical resistance.
Noryl PPO resins are produced by blending PPO with other materials, such as polystyrene or polyamide.Sabic Noryl PPO include: |
|
|
| 3. Chemical resistance: Sabic Noryl PPO has good chemical resistance. It is commonly used in automotive and electrical applications where chemical resistance is important. 4. Good electrical properties: Sabic Noryl PPO has good electrical properties. This makes it suitable for use in electrical and electronic applications, such as connectors and switches. 5. Ease of processing: Sabic Noryl PPO is easy to process and can be easily molded into complex shapes with thin walls. |
||
Related products
Different Noryl Resin have different applications
We recommend more different kinds of PPO categories for your reference:
Company Profile
The Shenzhen Samtion Chemical Co., Ltd
Focus on the export and production support of engineering plastics and special modified materials
15 Years Experience
We are a leading supplier of top end engineering plastics raw materials.
The company is formed by a group of senior teams engaged in the sales and production of engineering plastic materials for over 15 years.
More Than 1,000 Customers
Up to now, we have provided
high-quality products and services to more than 1,000 customers in various industries, including: electronics and electrical appliances, medical, food, automotive electronics, optoelectronic communications, photovoltaic new energy, water treatment,transportation and other industries.
Quality Assurance
Every batch of our products is subject to strict quality inspection to ensure the original supply. All products have MSDS, ROHS, SGS, REACH,EU, UL, COC / COA certificates!
FAQ
1. About quality assurance
We provide all product test authoritative reports required by customers, and all products have original factory shipment certificates and qualifications. We will take full responsibility for any customer complaints caused by our product quality problems.
2. About the shipping method
We can use land transportation, sea transportation, and air transportation according to customer requirements; we can also choose logistics suppliers according to customer requirements.
3. About the payment method
T/T, Western Union, PayPal, LC, etc. are all acceptable.
4. About MOQ:
The minimum quantity of an order is dependent on different types of materials, please ask our sales representatives
5. About quotation:
You can contact oursales representatives for a quotation at any time, we promise to reply within 7-24 hours
6. About technical support
We have a large technical support team, which can provide technical support including material selection, color matching service,mold consultation, product production service, etc. according to the situation of the customer's project.
