April 26, 2023
The hardware of the POS machine consists of a power adapter, a printing part, a host part, and most of it is made of plastic except for electronic devices. Many countries, regions, and enterprises have requirements for material selection of plastic products, such as:
1. Chlorine and bromine free environmental protection
2.1.5mm VO flame retardant
3. Require good mechanical performance and complete machine drop test
4. Require good heat resistance stability
5. Require good electrical characteristics
6. Good fluidity, injection molding, etc
We recommend Sabic Cycoloy C2950
Reason for recommendation:
Chlorine and bromine free environmental protection
1.5mm VO ,2.5mm 5VB UL94
Beam notch impact strength (23 ℃): 530 J/m ASTM D256
Bending modulus: 2650 MPa ASTM D790
Hot deformation temperature (1.8 MPa, unannealed, 3.20 mm) 90 ℃
Vicat softening temperature: 112 ℃
Compared to Leakage Resistance Index (CTI): PLC 0 UL 746A
High Arc Burning Index (HAI) 8: PLC 0 UL 746A
Melt flow rate: 10 g/10 min ASTM D1238
Sabic Cycoloy C2950