Send Message

Sabic Lexan ML7229 FDA And NSF 51 Compliant Limited Colors 2.5 MFR Potable Water/Extrusion Blow-Molding Applications

100KG
MOQ
*USD
Price
Sabic Lexan ML7229 FDA And NSF 51 Compliant Limited Colors 2.5 MFR Potable Water/Extrusion Blow-Molding Applications
Features Gallery Product Description Request A Quote
Features
Specifications
Melt Flow Rate, 300°C/1.2 Kgf: 2.5
Basic Infomation
Place of Origin: ——
Brand Name: Sabic Lexan
Certification: COA/ICP Test/Rohs/MSDS
Model Number: ML7229
Payment & Shipping Terms
Packaging Details: 25KG/BAG
Delivery Time: To be negotiated
Payment Terms: L/C, T/T, Western Union, MoneyGram
Supply Ability: To be negotiated
Product Description

Sabic Lexan  ML7229 resin is FDA and NSF 51 compliant (limited colors). 2.5 MFR. Potable water/extrusion blow-molding applications. UV-stabilized.


Property

TYPICAL PROPERTIES (1)      
MECHANICAL Value Unit Standard
Tensile Stress, yld, Type I, 50 mm/min 62 MPa ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min 65 MPa ASTM D 638
Tensile Strain, yld, Type I, 50 mm/min 7 % ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min 110 % ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 93 MPa ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span 2340 MPa ASTM D 790
Hardness, Rockwell R 118 - ASTM D 785
Taber Abrasion, CS-17, 1 kg 10 mg/1000cy ASTM D 1044
IMPACT Value Unit Standard
Izod Impact, unnotched, 23°C 3204 J/m ASTM D 4812
Izod Impact, notched, 23°C 747 J/m ASTM D 256
Falling Dart Impact (D 3029), 23°C 169 J ASTM D 3029
THERMAL Value Unit Standard
Vicat Softening Temp, Rate B/50 157 °C ASTM D 1525
HDT, 0.45 MPa, 6.4 mm, unannealed 137 °C ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed 132 °C ASTM D 648
CTE, -40°C to 95°C, flow 6.84E-05 1/°C ASTM E 831
Specific Heat 1.25 J/g-°C ASTM C 351
Thermal Conductivity 0.19 W/m-°C ASTM C 177
PHYSICAL Value Unit Standard
Specific Gravity 1.2 - ASTM D 792
Specific Volume 0.83 cm³/g ASTM D 792
Density 1.19 g/cm³ ASTM D 792
Water Absorption, 24 hours 0.15 % ASTM D 570
Water Absorption, equilibrium, 23C 0.35 % ASTM D 570
Water Absorption, equilibrium, 100°C 0.58 % ASTM D 570
Mold Shrinkage, flow, 3.2 mm 0.5 - 0.7 % SABIC Method
Melt Flow Rate, 300°C/1.2 kgf 2.5 g/10 min ASTM D 1238
OPTICAL Value Unit Standard
Light Transmission 88 % ASTM D 1003
Haze 1 % ASTM D 1003
Refractive Index 1.586 - ASTM D 542
Source GMD, last updated:01/04/2000    

Processing

Parameter    
Extrusion Blow Molding Value Unit
Drying Temperature 120 °C
Drying Time 2 - 4 hrs
Maximum Moisture Content 0.02 %
Minimum Moisture Content 0.01 %
Melt Temperature (Parison) 265 - 280 °C
Barrel - Zone 1 Temperature 260 - 290 °C
Barrel - Zone 2 Temperature 260 - 290 °C
Barrel - Zone 3 Temperature 260 - 290 °C
Barrel - Zone 4 Temperature 260 - 290 °C
Adapter - Zone 5 Temperature 260 - 290 °C
Mold Temperature 60 - 100 °C
Source GMD, last updated:01/04/2000  
• Uncontaminated regrind up to 25% is allowed.    
• Screw configuration affects melt temperature. A low shear, 2.5:1    
• Mold temperatures of 65°C - 95°C (150°F - 200°F) produce best surface appearance.    
• 15-50 rpm screw speed suggested. Adjust actural rpm for desired output while maintaining desired melt temperature range.
Increasing screw speed increases shear heating; use a hand-held pyrometer to measure melt temperature. Adjust barrel
temperatures to maintain recommended melt temperature range.
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.    
PLEASE CHECK WITH YOUR (LOCAL SALES OFFICE) FOR AVAILABILITY IN YOUR REGION    
(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours
storage at 23°C/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded
samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.    
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.  
(4) Internal measurements according to UL standards.    

 

For more information please download the datasheet

Sabic Lexan ML7229 FDA And NSF 51 Compliant Limited Colors 2.5 MFR Potable Water/Extrusion Blow-Molding Applications 0  Sabic Lexan ML7229.pdf

 

Get The Latest Quotation

 

First-level distribution source in South China

Reduce procurement costs, improve supply stability,

Help you find the most suitable engineering plastic materials

 

Sabic Lexan ML7229 FDA And NSF 51 Compliant Limited Colors 2.5 MFR Potable Water/Extrusion Blow-Molding Applications 1Click to consult and get the latest quotation within 24 hours!

 

sabic lexan pc products

 

Free Talk 24hours

Recommended Products
Get in touch with us
Tel : 86-13925273675
Characters Remaining(20/3000)