Sabic Lexan PC3412R resin is a 20% glass fiber filled, 4.3 MFR polycarbonate, MVR of 6. Mold release. Flame retardant, UL94 V0 and 5VA rated. Available in natural and opaque colors. It provides improved mechanical properties.
SABIC lexan PC features :
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress, brk, Type I, 5 mm/min | 110 | MPa | ASTM D 638 |
| Tensile Strain, brk, Type I, 5 mm/min | 5 | % | ASTM D 638 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 131 | MPa | ASTM D 790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 5510 | MPa | ASTM D 790 |
| Hardness, Rockwell M | 91 | - | ASTM D 785 |
| Hardness, Rockwell R | 122 | - | ASTM D 785 |
| Taber Abrasion, CS-17, 1 kg | 17 | mg/1000cy | ASTM D 1044 |
| IMPACT | Value | Unit | Standard |
| Izod Impact, unnotched, 23°C | 1014 | J/m | ASTM D 4812 |
| Izod Impact, notched, 23°C | 106 | J/m | ASTM D 256 |
| Tensile Impact, Type "S" | 63 | kJ/m² | ASTM D 1822 |
| Falling Dart Impact (D 3029), 23°C | 5 | J | ASTM D 3029 |
| THERMAL | Value | Unit | Standard |
| Vicat Softening Temp, Rate B/50 | 165 | °C | ASTM D 1525 |
| HDT, 0.45 MPa, 6.4 mm, unannealed | 148 | °C | ASTM D 648 |
| HDT, 1.82 MPa, 6.4 mm, unannealed | 146 | °C | ASTM D 648 |
| CTE, -40°C to 95°C, flow | 2.7E-05 | 1/°C | ASTM E 831 |
| Specific Heat | 1.17 | J/g-°C | ASTM C 351 |
| Thermal Conductivity | 0.21 | W/m-°C | ASTM C 177 |
| Relative Temp Index, Elec | 130 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 130 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 130 | °C | UL 746B |
| PHYSICAL | Value | Unit | Standard |
| Specific Gravity | 1.35 | - | ASTM D 792 |
| Specific Volume | 0.74 | cm³/g | ASTM D 792 |
| Density | 1.356 | g/cm³ | ASTM D 792 |
| Water Absorption, 24 hours | 0.16 | % | ASTM D 570 |
| Water Absorption, equilibrium, 23C | 0.29 | % | ASTM D 570 |
| Mold Shrinkage, flow, 3.2 mm | 0.1 - 0.3 | % | SABIC Method |
| Melt Flow Rate, 300°C/1.2 kgf | 4.3 | g/10 min | ASTM D 1238 |
| ELECTRICAL | Value | Unit | Standard |
| Volume Resistivity | >1.E+17 | Ohm-cm | ASTM D 257 |
| Dielectric Strength, in air, 3.2 mm | 19.2 | kV/mm | ASTM D 149 |
| Relative Permittivity, 50/60 Hz | 3.17 | - | ASTM D 150 |
| Relative Permittivity, 1 MHz | 3.13 | - | ASTM D 150 |
| Dissipation Factor, 50/60 Hz | 0.0009 | - | ASTM D 150 |
| Dissipation Factor, 1 MHz | 0.0073 | - | ASTM D 150 |
| Arc Resistance, Tungsten {PLC} | 7 | PLC Code | ASTM D 495 |
| Hot Wire Ignition {PLC) | 0 | PLC Code | UL 746A |
| High Voltage Arc Track Rate {PLC} | 3 | PLC Code | UL 746A |
| High Ampere Arc Ign, surface {PLC} | 4 | PLC Code | UL 746A |
| Comparative Tracking Index (UL) {PLC} | 5 | PLC Code | UL 746A |
| FLAME CHARACTERISTICS | Value | Unit | Standard |
| UL Recognized, 94V-1 Flame Class Rating (3) | 1.47 | mm | UL 94 |
| UL Recognized, 94V-0 Flame Class Rating (3) | 2.99 | mm | UL 94 |
| UL Recognized, 94-5VA Rating (3) | 2.99 | mm | UL 94 |
| Source GMD, last updated:06/27/2002 | |||
| Injection Molding | Value | Unit |
| Drying Temperature | 120 | °C |
| Drying Time | 3 - 4 | hrs |
| Drying Time (Cumulative) | 48 | hrs |
| Maximum Moisture Content | 0.02 | % |
| Melt Temperature | 315 - 340 | °C |
| Nozzle Temperature | 310 - 330 | °C |
| Front - Zone 3 Temperature | 315 - 340 | °C |
| Middle - Zone 2 Temperature | 305 - 325 | °C |
| Rear - Zone 1 Temperature | 295 - 315 | °C |
| Mold Temperature | 80 - 115 | °C |
| Back Pressure | 0.3 - 0.7 | MPa |
| Screw Speed | 40 - 70 | rpm |
| Shot to Cylinder Size | 40 - 60 | % |
| Vent Depth | 0.025 - 0.076 | mm |
| Source GMD, last updated:06/27/2002 | ||
Other related products we recommend
Please contact us for specific quotations and more details.
| Brand | Series | Model | Brand | Series | Model | Brand | Series | Model |
| Sabic | Lexan | 710 | Sabic | Lexan | D251 | Sabic | Lexan | HP41H |
| 1000R | D251RC | HP4 | ||||||
| 103R | D351 | HPS1 | ||||||
| 115 | D451 | HPS1R | ||||||
| 121R | D551RC | HPS7 | ||||||
| 123R | DC006 | HPX4 | ||||||
| 123SRM | DE0021E | IR1700 | ||||||
| 123X | DE0029 | KH3310UR | ||||||
| 124R | DE0029E | KH3460UR | ||||||
| 1301V | DE0029EF | L1225L | ||||||
| 141 | DEL34E | L | ||||||
| 141R | DEP43E | LED2245 | ||||||
| 143 | DF002FVQ | LN | ||||||
| 143R | DF002FV | LS1 | ||||||
| 144R | DF004AXC | LS2 | ||||||
| 201R | DFL329 | LUX2114G | ||||||
| 203R | DGN3030R2 | LUX2114 | ||||||
| 203RM | DL002 | LUX2180T | ||||||
| 2097 | DL4020 | LUX2614 | ||||||
| 2200R | DMX1435 | LUX7169 | ||||||
| 221R | DMX2415 | LUX7430C | ||||||
| 223R | DTK22 | LUX7432C | ||||||
| 2405 | DU242 | LUX7630C | ||||||
| 2407 | DX02437 | LUX7632C | ||||||
| 241R | DX07323 | LUX7636C | ||||||
| 243R | DX09309 | LUX9132C | ||||||
| 244R | DX10311 | LUX9610 | ||||||
| 244RF | DX11328 | LUX9612G | ||||||
| 2458 | DX11354X | LUX9616G | ||||||
| 2605 | DX14354X | LUX9616 | ||||||
| 2805 | DX15354 | LXTY1920T | ||||||
| 2807 | DX99699 | MB2213R | ||||||
| 2858 | EFR2151H | ML | ||||||
| 2865 | EFR2151HU | ML1655R | ||||||
| 3206 | EFR2151U | ML6411 | ||||||
| 3412ECR | ER007515 | ML6413 | ||||||
| 3412R | EX2078X | MPX1 | ||||||
| 3413R | EXL1112 | NX03583 | ||||||
| 3414R | EXL1112T | PC1000R | ||||||
| 500ECR | EXL1132 | PC | ||||||
| 500R | EXL1132T | PC2330.FRB0174 | ||||||
| 503R | EXL1330 | PC2502NH | ||||||
| 505R | EXL1414 | PC5800 | ||||||
| 505RU | EXL1414T | PK2870 | ||||||
| 63000CT | EXL1433T | R9453V | ||||||
| 6485 | EXL1434 | S | ||||||
| 6555 | EXL1434T | SLX2271T | ||||||
| 905 | EXL4019 | SLX2432T | ||||||
| 915R | EXL4412 | UF0067W | ||||||
| 920 | EXL4419 | XHT2141 | ||||||
| 920A | EXL5689 | XHT3141 | ||||||
| 923 | EXL8454 | XHT4143 | ||||||
| 923A | EXL8483 | XHT4143T | ||||||
| 925 | EXL9034 | H | ||||||
| 925A | EXL9112 | H3000UR | ||||||
| 925AU | EXL9134 | HF1110 | ||||||
| 925U | EXL9330 | HF1110R | ||||||
| 940 | EXL9330S | HF1130 | ||||||
| 940A | EXL9414T | HF1130R | ||||||
| 9417 | FPL3500 | HF1140 | ||||||
| 943 | FXD123R | HFD1034 | ||||||
| 943A | FXD1414T | HFD1711 | ||||||
| 945 | FXD171R | HFD1830 | ||||||
| 945A | FXD941A | HFD4271 | ||||||
| 945AU | FXE1112T | HFD4472 | ||||||
| 945M | FXE121R | HP2 | ||||||
| 945U | FXE1414L | CFR5630 | ||||||
| 950 | G2F23R | CFR7630 | ||||||
| 950A | G4F23R | CFR9111 | ||||||
| 953A | G6F23R | CFR9131 | ||||||
| 955 | GPN2050DF | CRX9411 | ||||||
| 9925A | GSH2020DF | CY6310 | ||||||
| AD | D20001 | |||||||
| BFL2000 | D2000P | |||||||
| BFL4000U | ||||||||
| BM5225X | ||||||||
| BPL1000 | ||||||||
| BY2710X |
With a strong sales network and strength, we have warehousing services in Guangzhou, Dongguan, Shenzhen free trade zone, Hong Kong and other four places (conventional product inventory exceeds 1000 tons). We can provide customers with rapid response, professional service and excellent products!
1. Professional focus: professional engineer service team with more than 15 years of experience; Provide a complete set of solutions and services from material sales, quality appraisal, mold design, molding and processing.
2. Perfect service: we have served many high-quality and excellent enterprises at home and abroad, and are well aware of customers' purchasing, product and service needs; From response time, price advantage, problem handling, etc., we provide comprehensive services based on customer needs in multiple dimensions.
3. Inventory supporting: the company has abundant inventory supporting resources, which are located in Guangzhou, Dongguan, Shenzhen free trade zone and Hong Kong. It has set up warehouses to stock goods, with a standing stock of more than 1000 tons, which can meet the timely spot purchase demand of customers and ensure the reliability and stability of the customer's material supply chain.
4. Logistics distribution: we have long-term and stable logistics partners. According to the needs of customers, we formulate efficient distribution plans and deliver high-quality products to customers in time.
5. Speed advantage: all quotation inquiries will be replied within 24 hours, and the spot materials will be delivered within 48 hours
6. Small batch type selection technical support service: accept small batch orders of 5kg at least; The professional engineer team can cooperate with customers to carry out material selection in the early stage of production, and provide corresponding material recommendations according to customer production and product requirements.
7. Quality assurance: our products are all from well-known manufacturers. Each batch of materials has various inspection reports and certificates including original factory certificate, MSDS, ROHS, SGS, reach, FDA, EU, UL, COC / COA, etc.
|
For more information please download the datesheet |
|
|
Sabic Lexan PC3412R.pdf |
|
Get The Latest Quotation
First-level distribution source in South China Reduce procurement costs, improve supply stability, Help you find the most suitable engineering plastic materials
|
|
